What's in a Kit?

Snow Blower Impeller Kit™ is a Single-Blade Kit, however Kits

come in 1/3/4/5/6 Blade configurations to meet your machine's needs.



Each Snow Blower Impeller Kit™ contains the following Top Quality,

      "Made in the USA" materials:

·        (1) 1/4" or 3/8” thick rubber paddle (2"W x 5"L) - (you trim to fit as needed)

o   Made from Styrene Butadiene Skirtboard (SBR) rubber

o   SBR rubber with minimum tensile strength of 725 PSI (5 MPA)

o   Hard rubber with a durometer of 65-75

·        (1) metal strap with holes - 1 3/8" W x 3 3/4"L

o   Punched flat bar grade 5 steel, 1/16" thick

·        (3) bolts (5/16-18 x 1 in. coarse thread) w/ 5/16-18 lock nuts (use 1/2" wrench & socket)

o   Hex bolts & Hex lock nuts nylon insert, grade 5 steel

·        (1) self-tapping screw (#14 x 1)

o   Sheet metal screw, Hex washer head self drilling, grade 5 steel

·        Instruction Sheet

So, if your Snow Blower had three impeller blades, you would need to buy a 3-Blade Snow Blower Impeller Kit™


* not included in kit




© 2012 SnowBlowerImpellerKit.com™ All Rights Reserved Snow Blower Impeller Kit™ Reg. USPTO