SnowBlowerImpellerKit-Installation Help

SBIK Installation Help

If you have the right tools on hand and even the most basic skills with tools you should be able to install your Snow Blower Impeller Kit™ in 1-2 hours depending on the configuration of your machine. To ease this process, the following information and links are provided for your convenience. Please take the time to download and carefully review the FAQs, Installation Instructions and Drawing showing how the kit should be installed in relation to the position of the metal brace on the underside of the impeller blade. While it's best to do so before you order to ensure your kit meets your needs, downloading and reviewing this information anytime before your kit arrives will help you prepare for a successful installation!

If you have ANY questions, or have any installation concerns at all, please feel free to let us know and we'll work with you to resolve them. Keep in mind also that if your machine requires it, we can customize your kit to fit if you don't feel up to it yourself. Let us know before you order and before your kit is shipped to you so we can ensure your complete satisfaction with our products and services!

Materials required for installation include:

Download ,docx file

Open PDF in Browser

Materials required for installation include:

* Corded drill w/6-12”L 3/8” pilot point drill bit. (Cordless drills are not powerful enough)

* 6-12” socket extension w/ 1/2” socket (for self-tapping screws)

* a little bit of oil to lubricate drill bit tip while drilling

* ratchet set w/1/2” socket ,1/2” open end wrench and 3’ brace of some kind (like a 1x3)

* utility knife, hacksaw (if necessary)

* not included in kit

Make sure you read our FAQs and review our drawing of installed kit prior to installation!

All Documents